|
|
|
|
Pilt on illustreeriv
|
Inductive Sensor NBB2-8GM40-E2-V1, M8 non-flush, Sn 2mm, PNO NO, Sf 1.5kHz, LED, -25..70°C, nickel-plated brass, LCP, M12 4pin, IP67, Pepperl+Fuchs Kood:
085181
Hind (indikatiivne)
Tootja
:
|
Saadavus:
21 päeva
|
Kaal:
0.0242 kg/tk
|
Maht:
0 m3/tk
|
|
|
|
|
Inductive Sensor NBB2-8GM40-E2-V1, M8 non-flush, Sn 2mm, PNO NO, Sf 1.5kHz, LED, -25..70°C, nickel-plated brass?LCP, M12 4pin, IP67, Pepperl+FuchsInductive sensor NBB2-8GM40-E2-V1
- 2 mm flush
- Increased operating distance
Datasheet excerpt: Technical data of NBB2-8GM40-E2-V1
| General specifications |
| Switching function | Normally open (NO) |
| Output type | PNP |
| Rated operating distance | 2 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 1.62 mm |
| Reduction factor rAl | 0.45 |
| Reduction factor rCu | 0.35 |
| Reduction factor r304 | 0.75 |
| Nominal ratings |
| Operating voltage | 10 ... 30 V |
| Switching frequency | 0 ... 1500 Hz |
| Hysteresis | typ. 5% |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 3 V |
| Operating current | 0 ... 100 mA |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA |
| No-load supply current | ≤ 15 mA |
| Switching state indicator | Multihole-LED, yellow |
| Functional safety related parameters |
| MTTFd | 2730 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 4-pin |
| Housing material | brass, nickel-plated |
| Sensing face | LCP |
| Housing diameter | 8 mm |
| Degree of protection | IP67 |
|
|
|
|
|
